廠商登入區員工登入區學術研究機構登入區    
 
  
 

 

稠密度控制

黏度控制

 

稠密度+黏度控制
  光阻顯影設備
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   

   

   
 

 
 
In Line Coating Controler ASM 2500

The ASM 2500 is an in-line controler specifically designed for keeping constant the viscosity of anti-scratch and/or anti-fog coatings used in the optical industry.

For optical applications, the ASM 2500 comprizes:
one wheeled chassis that houses the control electronics, the 2 refill canisters (one for solvant, one for coating) and the refill pump and supports the coulour touch-screen operator's interface

one in line X2-sensor (viscosity and temperature )

one set of non-contact level sensors for the coating tank





General View & Typical Set Up of ASM 2500

The ASM 2500 controls the level of the coating tank using 3 sensors : High, Low and Very Low. As soon as the level in the tank falls under the Low level (because of evaporation and/or consumption), the system will refill the tank with either solvant or coating, depending on the actual viscosity value compared to the set point.

Spécifications :

Viscosity range 1-20 cps or 5-100 cps
Précision +/- 0.5%
Temperature range 0-50 °C
Flow rate range Not applicable
Main dimensions 590 x 550 x 1200 mm (L x P x H)
Coating canister 10 litres, kept cool by externally supplied cold water loop
Solvant canister 20 litres
Power supply 100-240 V 50-60 Hz, 100 W

Click here to download the PDF datasheet about ASM2000 Controlers




If you don't find what you're looking for, Contact Us. We may have a suitable product that's not listed, or we may be able to develop a material to fit your specific needs. Tel : (02)2217-3442 / Fax : (02)2704-4070
 

 

 

  Copyright and Disclaimerc © Xuan Bao Hao Corp.