In Line Coating Controler ASM 2000
The ASM 2000 is an in-line controler specifically designed for keeping
constant the density of anti-scratch and/or anti-fog coatings used in the
optical industry.
For optical applications, the ASM 2000 comprizes:
one wheeled chassis that houses the control electronics, the 2 refill
canisters (one for solvant, one for coating) and the refill
pump and supports the coulour touch-screen operator's interface
one in line sensor (density, temperature and flow-rate thrue
filtration)
one set of non-contact level sensors for the coating tank
General View & Typical Set Up connections of ASM 2000
The
ASM 2000 controls the level of the coating tank using 3 sensors : High, Low
and Very Low. As soon as the level in the tank falls under the Low level
(because of evaporation and/or consumption), the system will refill the tank
with either solvant or coating, depending on the actual density value
compared to the set point.
Spécifications :
Density range 0.8 to 1.3 kg/litre
Precision +/- 1 g/litre
Temperature range 0-50 °C
Flow rate range 0-30 l/min
Main dimensions 590 x 550 x 1200 mm (L x P x H)
Coating canister 10 litres, kept cool by externally supplied cold
water loop
Solvant canister 20 litres
Power supply 100-240 V 50-60 Hz, 100 W
Click here to download
the PDF datasheet about ASM2000 Controlers
If you don't find what you're looking for,
Contact Us.
We may have a suitable product that's not listed, or we may be
able to develop a material to fit your specific needs.
Tel : (02)2217-3442 / Fax : (02)2704-4070
|
|
