|
![](default.files/sid.gif) |
![](tsid.gif)
![acrWO1.jpg](acrWO1sm.gif)
|
3 -
Non-flammable, water thin, very fast-setting solvent cement
for bonding acrylics. Also bonds styrene, butyrate, PETG, and
polycarbonate to themselves. Will not bond to cross linked
acrylics.
|
![acrWO4.jpg](acrWO4sm.gif)
|
4 -
Non-flammable, water thin, moderately fast-setting solvent
cement for bonding acrylics. Also bonds styrene, butyrate, PETG,
and polycarbonate to themselves. Will not bond to cross linked
acrylics.
|
![wo5.jpg](wo5.jpg)
|
5 -
Water thin, slow-setting solvent cement for bonding acrylics.
Also bonds styrene, butyrate, PETG and polycarbonate to
themselves. Will not bond to cross linked acrylics.
|
![acrWO16.jpg](acrWO16sm.gif)
|
16 -
Fast-setting, medium bodied, high strength acrylic cement.
Also bonds rigid PVC, ABS, styrene, butyrate, polycarbonate to
themselves and each other, as well as other plastics and porous
surfaces.
|
![acrWO16.jpg](acrWO1802sm.gif)
|
1802
- Medium-setting, light bodied cement for bonding acrylic,
styrene, rigid PVC, ABS, and butyrate to themselves.
|
![acrWO40.jpg](acrWO40sm.gif)
|
40 -
Two-part, reactive, high strength cement for bonding and
fabricating all acrylics to each other and to polyester, butyrate,
PVC, ABS, PETG, etc. Meets Mil Spec A-8576 Type lll.
|
![acrWO42.jpg](42IND.jpg)
|
42
- Has the same physical properties as #40, but is packaged
in a two component cartridge for use with a dispensing gun and
mixing tip.
|
|
Typical
Properties of WELD-ON ACRYLIC Adhesives and Cements
Number
|
Color
|
Number
of Components
|
Typical Specific Gravity
|
Minimum Expected Shelf Life
@ 73° F (yr)
|
Typical Viscosity (cps)
|
Expected Pot Life After Mixing
@ 73° F (min)
|
Meets
SCAQMD Rule 1168 VO Emissions Levels?
|
3
|
Clear
|
1
|
1.33
|
2
|
Water
Thin
|
-
|
Yes
|
4
|
Clear
|
1
|
1.37
|
2
|
Water
Thin
|
-
|
Yes
|
5
|
Clear
|
1
|
1.19
|
2
|
Water
Thin
|
-
|
Yes
|
16
|
Clear
|
1
|
1.08
|
2
|
800
|
-
|
Yes
|
1802 |
Clear |
1 |
0.89 |
3 |
150 |
- |
Yes*** |
40
|
Clear
|
2
|
1.03
|
1*
|
2,900
|
25
|
Yes
|
42
|
Clear
|
2
|
1.03
|
1*
|
2,900
|
25
|
Yes
|
Refrigeration is recommended to maintain shelf life.
Meets SCAQMD Rule 1168 under any of these conditions:
• Use
is < 1pt/day.
• Tubes are < 8 oz.
• Metal cans are < 5 oz.
• Use is < 10 gal./yr.
• Used in the solvent welding of medical devices.
|
|