|
The 4500 series
are single-coated polyester tames coated with a clear, premium
grade, controlled low tack acrylic adhesive system.
These protective films remove cleanly leaving no adhesive
residue even after exposure to high and low temperatures.
Resistance to moisture, solvent, mild acid and alkali, oil and
grease is excellent.
Surface
Applications:
Used to protect
aluminum, stainless steel, nameplates, copper, instrument
panels, specialty metals and plastics during fabrication
and installation. Used to protect printed circuit boards
from splash and fumes in plating process. Also for
automotive and aerospace production during machining,
bending, forming, handling, shipping and storage.
|
Construction |
4500 |
4502 |
|
Backing:
Polyester |
1.5 mil |
1.5 mil |
|
Adhesive:
Acrylate |
.5 mil |
.75 mil |
|
Colo: |
Clear |
Clear |
|
Performance Properties |
4500 |
4502 |
Adhesion to steel
|
2 oz./inch |
6 oz/inch |
|
Tensile
Strength |
42 lb./inch |
42 lb./inch |
|
Elongation |
110 % |
110 % |
Bonding
Information:
Bonding
surfaces should be clean, dry and free from grease and
oils. Sharp tooling must be used in die cutting to
avoid edge nicks which would tear upon removal. Adhesion
level is consistent on a given material, but will vary on
different substrates and surface finishes. 4500
is usually utilized on bright, smooth metals and plastics,
whereas
4502 is used on matte metals and textured
plastics/finishes.
Solving
Industry’s Bonding Film Problems By Material Systems
Engineering
Our
recommendations are made in good faith and are based on
our experience with these products.Since the conditions
of use of these products are beyond our control, this data
is given on the express condition and understanding that
Dielectric Polymers Incorporated
PMMA after hard coat protection
If you don't find what you're looking for,
Contact Us.
We may have a suitable product that's not listed, or we may be
able to develop a material to fit your specific needs.
Tel : (02)2217-3442 / Fax : (02)2704-4070
|
|
