通過親水性塗層，防止透明雙向拉伸聚酯薄膜冷藏貨物食品包裝，灰霧和引起透明度下降的冷凝出水分。

聚酯膜醫療應用。 診斷條帶，塗佈中的液體，血液必須快速且均勻地在表面上傳播。 可用親水性塗層實現。

XBH Anti-Fog Coatings and Condensation Control

Condensation Control Coatings have been developed for use on greenhouses and food packaging. Water condensation on extruded polycarbonate greenhouse sheets will form large concentrations of fungi in water droplets which eventually cause leaf spotting (browning) in many young plants. Our coating helps prevent this problem by having the water run off to the side of the panels. Condensation Control Coatings have been developed for use on greenhouses and food packaging. Water condensation on extruded polycarbonate greenhouse sheets will form large concentrations of fungi in water droplets which eventually cause leaf spotting (browning) in many young plants. Our coating helps prevent this problem by having the water run off to the side of the panels. 

We also provide a food grade anti-fog for  ready to eat produce, meat and bakery foods packaging. Unsightly condensation and water rivulets can be prevented resulting in a much more appealing end user product.  Our coating is safe, cost effective, Kosher approvable and easy to apply.  Contact us for more information.

Our Anti-Fog  coatings for optics and architectural plastics (e.g. ski and swim goggles, instrument lenses, sky lights) which prevents the accumulation of vision-obscuring condensation under high humidity conditions or with dramatic changes in temperature. Our patented coatings are sold in bulk to manufacturers of industrial safety and swim goggles, aircraft windows, automobile lighting, optical equipment, etc. We can also contract coat your product in our ISO 9001 Class 10,000 clean rooms.

Anti-fog coating for use on Shields , Face Masks , Safety Glasses , Ski Goggles , Aircraft Windows , Instrument Covers , Glasses , Mirrors , Food Packaging , Automobile Lighting

Condensation control coatings for us on Greenhouse plastics , Food packaging , Heat Exchangers , Architectural Panels

Covered by US Patents 4,467,073, 4,847,324 and 4,847,324 and corresponding foreign patents.


測定聚酯膜的抗霧性能如下：

溫度控制在23°C，相對濕度50%實驗室進行檢測（約17厘米，寬12cm，高約3厘米長），放置其含有50毫升水的托盤，托盤存放在一溫度控制的冰箱，在4°C和10分鐘，30分鐘，4小時，8小時後和除去評估24小時。在23°C的暖空氣冷卻到冰箱溫度的凝結形成進行了測試。抗霧劑膜需經過冷凝保持連貫透明的膜。
熱蒸汽或熱霧測試。250ml燒杯中含有50毫升的水，放置在溫度控制70°C水浴中，覆蓋有要測試的薄膜。 可以檢查試驗中，長期抗霧性作用和膜的沖刷阻力，透明度和霧度的測量 。
　

If you don't find what you're looking for, Contact Us. We may have a suitable product that's not listed, or we may be able to develop a material to fit your specific needs. Tel : (02)2217-3442 / Fax : (02)2704-4070